Phase Locked Loop Programmable FM Exciter/Transmitter 87.5 – 108 MHz RangeMain Features:Includes low pass/harmonic filter and can be used as a stand-alone transmitterInstant front panel programmability in 10 kHz incrementsAll functions via LCD password protectedAdjustable power output from 0 to 250 W with automatic power controlRemote control features (optional) include: power on/off, fwd & ref power metering, ability to change frequency and Internal temperature meteringTelemetry Output and FSK-ID Keyer (optional)FCC and Industry Canada ApprovedSpecifications:Rated Output Power: 0-250 Watts continuously variable (ALC)RF Output Connector: “N” type femaleRF Output Impedance: 50 ohmFrequency Range: 87.5 MHz to 108 MHzFrequency Programmability: direct from front panel in 10 kHz incrementsFrequency Stability: better than 5 ppm ( 500 Hz)Modulation Type: direct carrier frequency modulationEmission class: F3ESpurious & Harmonic Suppression: < - 80 dB or betterStereo Separation: 55 dB @ 1 KhzDistortion: < 0.1 % (typ. 0.05 %)Asynchronous AM S/N Ratio: 65 dB below reference carrier with 100%amplitude modulation at 400Hz without de-emphasis, no FM modulation presentSynchronous AM S/N Ratio: 60 dB or better below reference carrier with 100% amplitude modulation at 400 Hz, without de-emphasis, FM modulation = 75 kHz at 400 HzAC Power Requirement: 117 or 230 V, 10%, 50-60 Hz, single phase (Internally Selectable)Power Consumption: approx. 600 W from ACPanel Size: 483 mm (19") W x 88 mm (3") H (2 standard rack spaces high)Overall Depth: 410 mm (16")Weight: 11 Kg (24 Lbs)Ambient Temperature Range: 0 to 50 C (32 to 122 F)Pre-emphasis: for FCC 75 sec; for CCIR 50 sec internally selectable*Please consult a broadcast engineer to determine if this unit is right for your application and you are meeting all of the appropriate legal requirements. You can review the FCC regulations on LPFM and unlicensed usage below.