The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connect through a stereo 3.5 mm Mini-jack or (6.35 mm) jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The AV-NH1 is a professional grade product for studio quality fidelity and low noise performance.The AV-NH1 may be powered from an external 24 Vdc power supply, available separately. The AV-NH1 is equipped to operate from a PoE enabled network switch. The AV-NH1 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NH1, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.The AV-NH1 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.Main Features:Converts Two Dante Network Audio Signals to a Stereo HeadphoneOutput on Professional Quality 3.5 mm stereo Mini-Jack or JackFront-Panel Output Level ControlSpecial Software Not Required for Module SetupExceptional Low-Noise and Low-Distortion PerformanceHigh Resolution 24 Bit Digital to Analog ConversionLegendary RDL Analog Filtering Enhances Superb Audio PerformanceLED Indicator for Valid Power and Network SyncOperation from PoE Power (Class 0, IEEE 802.3af) or external 24 VdcMounts on a Microphone Stand using an RDL SF-MSM1Specifications:Network Connector: RJ45 Neutrik etherCONDigital Audio Ethernet Protocol: DanteTransmission Rate: 100 MbpsSample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHzBit Depth Supported: 24 bitsReference Level: 0 dBFS = 150 mW into 100 Outputs (2): Mini-jack or Jack, Stereo (L and R)Output Level (maximum): 0 dBFS = 150 mW into 100 Output Impedance: < 50 Frequency Response: 20 Hz to 20 kHz ( 0.5 dB)THD+N: < 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.015% at 1 kHz (typ)Noise: < -75 dB (below -20 dBFS); < -95 (below 0 dBFS)Crosstalk: < -80 dB (1 kHz, -20 dBFS)Headroom above -20 dBFS: 20 dBIndicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)Ambient Operating Environment: 0 C to 50 CPower Requirement: PoE Class 0, IEEE 802.3af, or 24 Vdc @ 80 mA, Ground-referencedSpecification Conditions: Gain/Level: 1 dBDimensions: 4.23" (10.74 cm) W; 1.68" (4.27 cm) H; 6.29" (15.98 cm) DPackage Type: Cardboard BoxPackage Dimensions: 7 x 4.375 x 2.25 in.Shipping Weight: 1.36 lbs.WEEE weight: 1.15 lbs.Tariff code: 8543.70.9100