Offering the same performance and hardware quality as TASCAM Sonicview recording and live mixers, TASCAM SB-16D Dante-networked 16-in/16-out stage boxes offer all the advantages of Dante networking, combined with seamless integration with TASCAM Sonicview recording mixers. The stage boxes can be used as a floor stage box or rack mounted, and multiple stage boxes can be used simultaneously in a Dante network.When a SB-16D stage box is connected to a TASCAM Sonicview 16XP or 24XP recording mixer, microphone gain can be remotely controlled from the mixing console, and all SB-16D I/O comes up on the TASCAM Sonicview VIEW touch screens for hassle-free ease of use.Easily accommodate large ensembles and extensive installed Dante systems using the SB-16D’s 16 XLR mic/line inputs and 16 XLR line outputs. Need more I/O? Simply network multiple SB-16Ds. The mic/line inputs are extremely quiet, achieving a -128 dBu EIN with a +32 dBu maximum input level. Each input channel has +48V phantom power and an SIG OL LED for input-level monitoring. Each line output also is equipped with SIG OL LEDs.As in TASCAM Sonicview recording mixers, each SB-16D microphone input feeds a TASCAM Class 1 HDIA (High Definition Instrumentation Architecture) preampthe finest mic preamp TASCAM has ever made. Thanks to an instrumentation amplifier with extremely good noise characteristics in the first stage, Class 1 HDIA microphone preamps exhibit excellent EIN, signal-to-noise ratio, distortion ratio, and frequency response. The mic inputs can accept up to +32 dBu signals, providing plenty of headroom for sudden level increases. As with TASCAM Sonicview recording mixers, the SB-16D uses 32-bit analog-to-digital converters and a 96 kHz sampling frequency. Repeated internal and external evaluations were conducted to fine-tune the SB-16D, ensuring best-in-class sound that will never disappoint.Main Features:16 in/16 out Dante enabled stage box with redundancy16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators16 XLR line outputs with SIG OL LED output signal indicatorsUp to 96 kHz sampling and 32-bit precisionSupports both floor installation and 3U rack mountingFully controllable from connected TASCAM Sonicview mixersRemote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOSEquipped with DC input and supports redundant power supply (DC power supply not included)Equipped with 8 in/8 out expansion GPIO terminals, expandable to 16 in/16 out when connected to a TASCAM Sonicview mixerSwitchable reference levelEquipped with etherCON compatible connectors as Dante connectionDante Domain Manager supportAES67 interoperabilitySMPTE ST 2110 interoperabilitySpecifications:MIC/LINE INPUTS (1-16):-CONNECTOR XLR-3-31 type (1: GND, 2: HOT, 3: COLD)-Input Impedance: 5.0k and more-Max Input Level: +32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF)-Min Input Level: -42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF)-Phantom Power: +48V availableLINE OUTPUTS (1-16):-CONNECTOR: XLR-3-32 type (1: GND, 2: HOT, 3: COLD) -Nominal Output Level: +6dBu (D.ref: -9dB) +4dBu (D.ref: -14dB, -16dB) +4dBu or 0dBu (D.ref: -18dB, -20dB) -Max Output Level: +15dBu(D.ref.: -9dBFS, A.ref: +6dBu) +18dBu(D.ref.: -14dBFS, A.ref: +4dBu) +20dBu(D.ref.: -16dBFS, A.ref: +4dBu) +18dBu(D.ref.: -18dBFS, A.ref: 0dBu) +20dBu(D.ref.: -20dBFS, A.ref: 0dBu) +22dBu(D.ref.: -18dBFS, A.ref: +4dBu) +24dBu(D.ref.: -20dBFS, A.ref: +4dBu) *D.ref.: Digital Reference Level, A.ref.: Analog Reference Level*0dBu=0.775Vrms-Output Impedance: 100 or lessDante(PRIMARY/SECONDARY):-CONNECTOR: etherCON Cat5e compatible -Number of channels: 64 channels (48 kHz), 32 channels (96 kHz) -Ethernet: 1000BASE T(IEEE802.3ab) -Cable: CAT5e STP-Supports redundant mode and Switched modeGPIO: -CONNECTOR: D-sub 25pin (8in/8out, female, inch) -Input circuit: pull up (5V) -Output circuit: Open corrector-Output impedance: 10-Withstand Voltage: 20V-Maximum current: 35mA+5V Maximum supply current: 50mADimensions: -454(W) x 140 (H) x 179.6 (D) mm (The original foot is attached) -482.8(W) x 132(H) x 120(D) mm (Rackmount angle is attached) -17.88(W) x 5.52(H) x 7.08(D) inch (The original foot is attached) -19.01(W) x 5.20(H) x 4.72(D) inch (Rackmount angle is attached)Weight: 4.5kg / 9.93 lbAC Power Supply: AC100V 240V 50/60 HzDC Power Supply: DC11V/4A – 27V/2APower Consumption: 44WOperating Temperatures: 0 – 40 Supported Operating System: -Windows: Windows 11 64 bit, Windows 10 64 bit-Mac: macOS Monterey(12), macOS Big Sur(11), macOS Catalina(10.15) -iOS: iPadOS 15, iPadOS 14Included Items: -SB 16D x1-Power Code (JAPAN USA/EUROPE/OCEANIA) x1-Rackmount angle screw kit x1-TASCAM ID registration guide x1-Owner’s manual with warranty x1MIC PRE AMP EIN (Equivalent Input Noise): -128dBu or lessDistortion:-0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA)-0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA)Frequency characteristic: -20Hz – 20kHz +0dB-0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA) -20Hz – 40kHz +0dB-1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA) -20Hz – 20kHz +0dB-0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA) -20Hz – 40kHz +0dB-1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA)Crosstalk: 100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA)Dynamic range: -110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA) -111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz) -112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz)