The Radio Design Labs STU-BA2 two-channel interface amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. The mono sum output may be used to drive patch-bay jacks, monitors or subwoofer amplifiers.Separate Dual-LED VU metering is provided for the left and right outputs. A green LED illuminates at 15 dB below +4 dBu. The intensity of the green LED progresses from minimum at -11 dBu to full intensity at +4 dBu. The adjacent red LED illuminates at +4 dBu.The audio clarity, low noise, low distortion and excellent crosstalk performance makes this module ideally suited to a wide variety of demanding audio applications. Use this module in conjunction with other RDL modules as part of a high quality, flexible audio/video system.PS24AS power supply not included. Convert stereo IHF levels to stereo PRO Additional summed MONO OUT Independently adjustable gain Ground-Referenced conversion module Dual-LED VU metering for each channel Inputs (2): Unbalanced line-level Input Impedance: 10 k Input Signal Range:-20 dBV to -10 dBV Outputs (3): +4 dBu balanced (left, right, mono sum) Gain: 2 dB to 22 dB (adjustable) THD+N: < 0.02% (20 Hz to 20 kHz) Frequency Response: 20 Hz to 20 kHz (+/- 0.2 dB) Noise: < -85 dB (referred to +4 dBu) Indicators(4): 1 green LED per channel indicating 15 dB range below +4 dBu output level output level IMD: < 0.004% Crosstalk: < -75 dB @ 1 kHz < -60 dB @ 10 kHz Headroom: > 18 dB above +4 dBu Power Requirement: GROUND-REFERENCED, 24 Vdc @ 75 mA Ambient Operating Environment:0 C to 55 C