The CG-2000 from TASCAM provides reliable clock output with redundant systems for confident on-air broadcast operation. The Video Sync/Master Clock Generator includes four video clock outputs and a video clock input ensure tight synchronization with video devices, including tri-level sync for high-definition video.Redundant power sources and clock sources are provided for reliable operation, insuring transmissions against dropouts or dead air. A GPO (General Purpose Output) is provided for tally alarms and monitoring system status. An additional Analyzer function is also available to measure input frequencies, levels, and termination to assist troubleshooting in large facilities.The CG-2000 has twelve word clock outputs, two AES/EBU, and two S/PDIF outputs. Two of the clock outputs can output multiples of 1/2Fs, 1/4Fs, 2xFs, 4xFs, and 256x the selected sampling rate. Four front-panel preset buttons recall often-used frequencies and settings. Presets and error logs can be saved to a USB drive. A menu screen is provided for additional settings, and the front panel can be locked to prevent accidental changes.Inside the CG-2000 clock generator is a high-quality OCXO. This oven-controlled crystal oscillator has 0.01PPM accuracy the highest precision in its class. Jitter Management and Glitch-free Relocking circuits make TASCAMs CG-series generators ensure highly-accurate clock outputs. For applications demanding even more accuracy, a 10MHz input accepts signal from Rubidium or GPS-based generators.With best-in-class clock precision, glitchless relocking, and broadcast-specific features, the TASCAM CG-2000 provides reliable synchronization to post and broadcast installations.Main Features:Dual power supplies for redundancyDual clock input for redundancyFour video clock outputsVideo clock inputTri-level sync support for high-definition videoAdditional Analyzer functions for troubleshootingHigh-precision OCXO (Oven-Controlled Crystal Oscillator) with 0.01PPMJitter management circuit for stable clock outputGlitch-free relocking circuit prevents noise and skipping during clock dropouts and recovery10MHz input for use with Rubidium or GPS clock generatorsTwelve word clock outputs, two of which support 1/2Fs, 1/4Fs, 2xFs, 4xFs, and 256x the selected rateWord clock, AES/EBU and S/PDIF clock inputsFour system presets, saved internally with USB drive backupSampling Frequencies from 32kHz to 192kHz supportedPanel lock switch to prevent accidental changes1u rack mount sizeGPO for tally alarms and status monitoring