Omnia VOLT is the latest triumph from the people who brought you the multiple-award-winning Omnia.11, the acclaimed Omnia.9, the power-packed Omnia 7, and the 13,000+ Omnia ONEs currently in service. But this is not just another audio processor. With VOLT, we have rewritten the rules for broadcast DSP, fine-tuning our algorithms and creating the worlds best-sounding, most powerful, incredibly versatile 1RU audio processor. VOLT gives you more sonic performance and processing power in one rack unit than others give you in three.Main Features:New-Generation Frank Foti-designed Clipper.Dynamics Engine designed by Senior Algorithm Developer Cornelius Gould.Six Separate AGC Sections. One wideband, plus five separate time-aligned multi-band sections, each with separate controls for every important parameter. Plus a tunable mid-band crossover.Five Separate Time-Aligned Limiters, each with separate Drive, Hold, Threshold, and Attack/ Decay.Variable Deep Bass, Phat Bass, and Warmth Enhancers.Bass Pre-Clipper. Fully adjustable with Tightness and Girth controls.Clipper Silk Adjustment.Sensus Processing for Digital Program streams.Adjustable BS-412 Threshold and Processing for full compliance with ITU standards.Stereo Enhancement for FM Analog, without Adding Multipath.Variable High-Pass and Switchable Phase Rotator.Automatic Mono Dry Voice Sensing.Totally Flexible Signal Path. Use analog, AES/EBU digital, or Livewire AoIP inputs; analog, AES/EBU digital, Livewire, or composite outputs. Adjust channel balance and correct polarity separately on each input. Save and recall input/output setups for different applications. All outputs are always active, regardless of input type.Switchable Insert Points for Voltair, Watermark Encoders, or Other Downstream Encoding.Automatic Failover signal switching.QuickT weak System lets you fine-tune your sound like a processing genius.Graphic User Interface is easy to navigate, but gives you the deep level of control you need.Built-in HTML-5 Server for full control from any computer, tablet, or smartphone without special plug-ins.Rugged 1RU Construction fits any control room, technical center, or transmitter shack, with easy-to see LED meters.Cool Running, Fanless Operation. VOLT can even be used near live mics.Flexible Pre-Emphasis Switching makes it easy to fit VOLT into any air chain.Dual Variable Composite Outputs (with FM DSP|Core).Variable Pilot Level and Phase (with FM DSP|Core).Built-In Tone Generator provides for quick setup and calibration.Specifications:Frequency Response User selection of flat, 50 s, or 75 s pre-emphasis curve within 0.50 dB, 30 Hz to 15 kHzSignal-to-Noise Ratio Audio >95 dB analog, >120 dB digital I/O. System DistortionLess than 0.01% THD, 20 Hz 7.5 kHz (second harmonic distortion above 7.5 kHz is not audible in the FM system) Latency18ms nominal, +-0.5ms depending on IO selection. Low Latency FM version <7ms Input / OutputComposite: Output impedance 75, single-ended and floating over chassis ground. BNC connectors with EMI suppression. Maximum cable 100 / 30M RG-58U.Output level: Separately adjustable for each of two outputs, 0V - 10V in 0.05V steps.Pilot Level: Adjustable from 4.0% to 12.0% in 0.1% steps and OFF. Pilot Stability: 19 kHz, 0.5 Hz. S/N: -85 dB typical, 75 S de-emphasized across 15 kHz, at 100% modulation Distortion: < 0.02% THD 20 Hz 15 kHz, 75 S de-emphasized @ 100%.Stereo Separation: > 65 dB, 30 Hz 15 kHz. Linear Crosstalk: > -80 dB, main to sub or sub to main channel @ 100%. Non-linear Crosstalk: > -80 dB, main to sub or sub to main @ 100%. 38 kHz Suppression: > 70 dB @ 100%. 76 kHz Suppression: > 80 dB @ 100%. Pilot Protection: > -65 dB relative to 9% pilot injection, 1 kHz. 57 kHz (RDS/RBDS) Protection: > -50 dB.Analog Left and Right Stereo on EMI-suppressed XLR-3, balanced with pin 2 hot.Input: Electronic balanced, impedance 10k, nominal +4 dBu, max +22 dBu.Output: Impedance 20 for >600 load, +4 dBu nominal, +22 dBu peak. Converters: 24 bit, 128x oversampled with linear-phase anti-aliasing filter.Digital Stereo per AES/EBU standard, 24 bit resolution. Input locks to any rate 32 kHz 108 kHz. Output locks to input, internal 48 kHz, or separate external AES/EBU digital black reference 32 kHz 96 kHz.Audio over IP Audio and control over IP per Livewire standard, on same RJ-45 used for Ethernet control.Remote Control GPI: EMI suppressed DB-9 at logic levels, +5 V and ground supplied. Ethernet: 10/100BaseTX.Ethernet on EMI-suppressed RJ-45. TCP/IP control via HTML-5 internal web server, password protected. Manual addressing and port selection.Crystal Semiconductor CS5361, 24 bit 128x over-sampled delta sigma converter with linear-phase anti-aliasing filter.Pre-ADC anti-alias filter, with high-pass filter at <10 Hz.Delta sigma converter with linear-phase and anti-aliasing filter.MX Inputs have high pass filter <0.1HzElectrical/PhysicalPower: 100 - 250 VAC, 47-63 Hz. < 40 VA. Typical draw 12W RMS, maximum 15W RMS. Internal supply with overVOLTage and short circuit protection. Meets EN55022, EN55011 Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3 immunity compliant. Full international safety approval.CE marked. EMI suppressed IEC male connector. Detachable 3-wire power cords supplied for US and European use. Temperature: 32 to 122 F / 0 to 50 C for all operating VOLTage ranges.Humidity: 0-95% RH, non-condensing.Dimensions: 19 wide x 1.75 high x 16 deep (48.26cm x 13.335 cm x 40.64 cm including connectors. Unit requires one EIA rack space for mounting.Shipping Weight: 12 lbs. / 5.5 kg