RemoteMix 2 is a two-channel field mixer / headphone amplifier built for the remote broadcast environment. More than just a field mixer, RemoteMix 2 provides a communications interface for remote broadcast, IFB, or a backup audio path. The integrated headphone amplifier provides sidetone to monitor all inputs plus an external feed. RemoteMix 2 features a phone line hybrid with keypad along with a wired notebook/cell phone headset interface. All sections are designed to work together, saving setup time and wiring in the field.TV RemoteMix 2 Combines a small front-end mixer with two powerful 1/4 headphone outputs. Send and receive interview audio while pulling IFB off the phone line, cell phone, or notebook.Radio – RemoteMix 2 is perfect for live remotes. Use it as a front-end mixer for your POTS, ISDN, IP or smart phone codec. Use it as a phone line hybrid, calling in to your studio talk show hybrid.Main Features:Two XLR mic jacksTwo 1/4 headphone jacks with individual level controls.XLR Line Out3.5 mm Send and Receive jacksLED VU MeterPhone line hybrid with DTMF keypadWired phone headset interface (2.5 & 3.5 mm interfaces)Dual 9 volt batteries100-240 VAC External AC SupplyMade in USASpecifications:InputsMicrophones (2): Female XLR Mics: 2k ohms (-25 dBu nom) Channel 2 has -40 dB Mic/Line pad switch = +16 dBu max. 50k ohms.Line Input: 1/8 (3.5mm) Stereo Line: 20k ohms -10 dBu nom.Headphone Cue In: 1/4, 20k ohms -10 dBu nom.OutputsBalanced Out: Male XLR +16 dBu max, 20 Hz – 20 kHz, +/- 1dBLine Out: 1/8 (3.5mm) Stereo: 100 ohms, -10 dBu nomHeadphone: 1/4 Stereo: 8 ohms / 1/3 watt per channelPhone LineConnector: RJ11CIsolation: 3750 VACRinger: 0.5B RENWireless phone: 1 meter cable with 3 conductor 2.5 mm plug, 1 meter cable with 4 conductor 3.5 mm plugPower: 100-240 VAC, 50-60Hz or Two 9 VDC batteriesSize: 7.75 x 6.5 x 2.3 Weight: 2.1 lbs (960 g)