The Moseley Rincon is the broadcast industry’s first Software Defined Audio Transport Product optimized to deliver multichannel digital audio over IP, TDM or Radio links and networks simultaneously.Rincon 404’s standard features include analog stereo ports (0 in, 4 out), 4 direction-programmable AES ports, 3 RS232 ports, an E1/T1 port and an Ethernet port. It adds advanced features such as 3 solid-state relays, 3 digital inputs, 3 additional RS232 ports, a secondary E1/T1 port and a secondary Ethernet port. 4 stereo channels per unit provides high payload capacity, supports multi-station clusters Bidirectional Ethernet transport in T1 mode supports HD Radio stream and IP based equipment control Very low delay for critical real-time broadcasts AES/EBU and Analog XLR connectors and integrated Analog and AES / Audio Switcher for operator’s ease of use Choice of Linear Uncompressed, MPEG2, MP3, AAC LC&LD, and G.722/G.711 maximizes performance over any network topology Simultaneous E1/T1, IP and Radio transport allows broadcasters to select the most cost effective network available Integrated Ethernet Switch for QOS to make sure your audio gets through the traffic Integrated Web Server/SNMP Agent for ease of management Manage Rincon from your Smartphone or Tablet Auto negotiation of parameters between units makes it easily deployed and field configurable Unicast/Multicast RS-232 channels for RDS or device control 8 Alarm and 3 Status conditions are transported across the link 100 parameterscan be mapped to alarms or status reporting Interoperability: ACIP Compliant and VLC Compatible FEC: Pro-MPEG CoP 3 r2 Streams: Up to 8 Audio Streams VLAN: IEEE 802.1Q Support Packet Size: User selectable per stream Jitter Buffer: Adaptive or adjustable per stream QoS: Per stream, ToS, DiffServ Topology: Point-to-Point unidirectional; Point-to-Point bidirectional; Point-to-Multipoint multicast Synchronous Backup: Programmable failover per stream to Alternate audio source and transport Latency: IP TRANSPORT 30 – 500 ms Frequency Response: < 5 Hz to 22.5 KHz (48 kbps); < 5 Hz to 15 kHz (32 kbps) Distortion: < 0.01% at 1 kHz Sample Rate: Selectable 32, 44.1, 48 kHz; built-in rate converter Dynamic Range: 90 dB static encoder/decoder: > 120 dB AES EBU Cross Talk: -80 dB Level Stability: < 0.2 dB Channels Supported: 4 stereo channels digital audio; 4 stereo channels analog audio Source Encoder and Decoder Choices: Uncompressed, MPEG Layer 2/3; AAC - LD, LC, G722, G711 Audio Connectors: Analog input XLR Male, output XLR Female, AES/EBU, RJ-45 (Ext XLR Cable) Audio Sample Rates: 32/44.1/48 kHz selectable, built-in rate converters Analog Audio Inputs: Electronically balanced, 600 ohm/10 kohm, selectable, CMRR>60 dB Analog Audio Outputs: Electronically balanced, low-Z Analog Audio Level: -10 dBu to +18 dBu Digital Audio: AES/EBU AES/EBU I/O: Transformer balanced, 110 ohm Data Input Rates: Async, 300-9600 bps selectable Bits: 16 or 24 bits E1/T1 Interface: 2 X E1 / T1 CSU: Built-in Connector: RJ-45, available BNC adaptor Impedance: 100 ohm balanced T1 Line Codes: B8ZS, AMI T1 Framing: ESF, D4 E1 Line Codes: HDB3 E1 Framing: 256N, 256S, with/without CRC-4 E1 Compliance: CCITT Rec. G.703, G.704, G.732 Line length EQ: Short-haul and long-haul supported Ethernet Interface: 2 X 100Base-T Interface Standard: Ethernet IEEE 802.3 bridge Connector: RJ-45 (2 ports) Power: Universal AC 90-260V, 47-63 Hz optional redundant power Supply Optional 24Vdc, 48Vdc supply Dimensions: 1.75″x 17.5″ x 8.5″ (1RU), 44.5mm x 445mm x 216mm Mount: Rack mount with included ears Temperature: 0C to 50C Operational Humidity: 90% Non-condensing Regulatory: FCC Part 68, FCC Part 15, ETSI