Description:

If you need to do some data storage in Arduino, then using the EEPROM Memory Module is probably the most simple practice. In actuality, Arduino used the ATmega chip itself has a certain EEPROM memory, but only a limited number. Here is the external EEPROM memory module which uses the I2C bus line to connect with Arduino, and with a pluggable chip, inserted in this series, so it will easy to expand the capacity, basically just need to insert a bigger capacity EEPROM chip.

The EEPROM Memory Module is based on EEPROM chips of AT24C series, 256Kbit capacity, thats 32k bytes. The EEPROM module communicates with Arduino through the I2C interface. It will be better to use Arduino-Sensor-Shield-V4.0 and the Arduino-I2C-COM-Cable.

Specifications:

• Chipset: AT24C256
• Maximum Operating Voltage: 6.25V
• Output Current: 5mA
• Operating Temperature: -55 ~ +125C
• Storage Temperature: -65 ~ +150C

Features:

• 8P chip seat, installation of AT24C256 chip.
• Pin-powered onboard power indicator.
• I2C communications required a pull-up resistor.
• All pins are leads and marked address input and direct write-protect pin jumper settings.

Package Included:

1 x EEPROM Memory Module AT24C256 I2C Interface EEPROM Memory Module