This 1.27mm pitch, 2×5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this hardware with your own software. It’s specifically sold to allow soldering onto our nRF52 Feather to add SWD debug/connect capabilities. You can also straighten out the SMT pins to solder into a thru-hole connector.

This connector snaps into any 10-pin 2×5 socket-socket 1.27mm IDC (SWD) cable. Used together, they are handy for programming or debugging small boards, commonly found on ARM Cortex dev kits.

• 1.27mm pitch
• 2×5 male SMT Box Header
• Used with SWD cable breakout boards and nRF52 Feather
• Compatible with 10-pin 2×5 socket-socket 1.27mm IDC cables
• Useful for ARM Cortex development kits programming and debugging