This is a version of ourAluminium Armour case for Raspberry Pi 5with a high-airflowblower fanfor ultimate cooling performance!

If you plan to run very power-hungry projects with yourRaspberry Pi 5or keep your project in a warm environment, this might be the better option for you.

The two-part aluminium body makes direct contact (via thermal pads) with your Pi 5’s critical components, ensuring excellent heat transfer – backed up by the blower fan. The fan makes use of the Raspberry Pi 5 JST fan socket connector, keeping all your GPIO pins free for your project and allowing software control based on the temperature of your CPU – keep the fan off when it’s not needed!

All ports and pins are accessible including GPIO andMicro SDaccess, fan/UART/RTC headers and even cut-outs for the PoE, CSI/DSI and PCI-E ports.

Assembly is easy – first, secure the blower fan with the three silver screws, then fit the thermal pads (remove the backing film first), position the upper/lower sections, and finally use the four black screws to secure the case together.

Note:

• Do not overtighten the fan screws! They only need to be finger-tight and‘just bite’– no more or you may damage the fans!
• CSI, DSI and PCI-E ribbon cables should be fitted to the Raspberry Pi before assembling the case. You will need to disassemble the case to swap them out (which is just a matter of removing four screws).
• Raspberry Pi not included

Features

• Aluminium Armour Blower Fan case for Raspberry Pi 5
• Hybrid design – heatsink and case in one!
• Efficient passive cooling combined with high-airflow blower fan active cooling
• Software-controllable fan – option to only turn them on when your CPU hits a certain temperature
• Rugged aluminium body for protecting your Pi 5
• Access to all ports and pins
• Easy assembly
• Colour – Matt Black

Package Contents

• 1x Aluminium Armour body (two parts)
• 1x Blower fan
• 4x Body screws (black)
• 3x Fan screws (silver)
• 1x Thermal pad set

Raspberry Pi not included