The INA169 is a high-side current monitor, which means that you place a resistor (a shunt resistor) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the measured voltage drop. If you place a resistor from the output of the INA169 to ground, you can measure the voltage at the output.

Input common-mode and power supply voltages are independent and can range from 2.7V to 60V on the INA169 and quiescent (sleep) current is only 60uA.

Resources

• Schematic
• Eagle Files
• Datasheet(INA169)
• Hookup Guide
• GitHub