The 1591B Proto Board for Pico is designed to fit both the Raspberry Pi Pico and the Raspberry Pi Pico W with enough prototyping room for additional components, connectors or sensors.

Best of all, these fit directly inside the Hammond 1591BFLBKenclosure. Ideal for a one-off project that needs an easy enclosure and mounting solution!

Your Pico is attached using large solder pads these are intended to be soldered using the castellated edges on the Pico and are easily accomplished using a normal soldering iron. The board breaks out all 40 GPIO pins from the Raspberry Pi Pico to easily accessible pins. The prototyping area measures 12 x 12 pins, but we have also included full-length 3.3V / GND rails and also a VSYS rail if you need access to that as well.

Raspberry Pi Pico, Enclosure and hardware are not included.

Features

• Dimensions: 91 x 50mm
• Plated through holes
• 1.6mm FR4 PCB material
• Mounting Holes: 84mm x 43.25mm
• Raspberry Pi Pico footprint with familiar breadboard prototyping area
• Raspberry Pi Pico and Raspberry Pi Pico W compatible
• 1 oz. copper layer

Package Contents

• 1 x 1591B Proto Board for Raspberry Pi Pico