An Infrared sensor (IR) module used for receiving TV remote signals. Perfect for the Raspberry Pi as it runs off 3.3V.

To connect to the Pi (see image for pin numbering):

• Connect Pin 1 to a GPIO port.
• Connect Pin 2 on the sensor to ground (GND) on the Pi.
• Connect Pin 3 on the sensor to 3.3V on the Pi.

Technical Features:

• Carrier Frequency: 38kHz
• Transmission Range: 40m
• Directivity: 45
• Supply Voltage Min: 2.5V
• Supply Voltage Max: 5.5V
• Supply Current: 700A
• Opto Case Style: Through Hole
• Operating Temperature Min: -25C
• Operating Temperature Max: 85C
• Manufacturer: VISHAY TSOP58238