This bundle includes the Arrakis DARC S-15 Console, the DARC 16 Channel Virtual Console Software and 2 SIMPLE-IP-16A rackmount units.Main Features:DARC S-15 Console15 Fader ChannelsProgram, Audition, Utility, and Cue buttons for each channelDARC Virtual software included8 programmable soft keysVolume control & toggle Monitor, Headphone and CueDARC 16 Channel Virtual Console SoftwareDynamic source switching that allow you to connect to 64 input sources.Use any ASIO enabled soundcard.8 Phone Mix Minus Buses to connect to eight phone hybrids.Single Channel Playback for podcasters. This allows you to stream and record individual channels, post fader.10 point multi touch for touch screens. This allows you to control multiple faders at the same time.Advanced user presets. Quickly and easily switch from one show layout to the next.Soft keys for quickly triggering closures, user presets and more.Performance improvements.SIMPLE-IP-16ABeauty in Simplicity – Do you have two studios you want to connect? You could use complicated punch blocks and run miles of cable. Or, you can use Simple IP. With Simple IP, you connect your audio equipment to one of our Simple IP boxes. The Simple IP8 has 8 in x 8 out mono connections and the Simple IP16 has 16 in x 16 out mono connections. Allowing you to connect up to 8 to 16 audio channels in and out. Or you may do 4 to 8 in and out, if you want to use stereo.Expandable – Do you have more studios, or more equipment you need to connect? No problem. Simply add more Simple IP boxes. It is that simple.Connect Any Audio Hardware – Simple IP works with any of our ARC or MARC series consoles. Using RJ45 inputs and outputs, you can quickly and easily connect any of our boards to Simple IP in seconds.Have other hardware or consoles you want to connect? No problem. Simply connect your hardware to Simple IP via the RJ45 inputs and outputs.Once connected to your network, the Dante Controller interface will automatically detect each Simple IP connection within seconds.Connect Using Any Switch – Dante will work with any Ethernet switch. Simply connect Simple IP to your network switch and Dante will auto-detect any Dante device.It is recommended to use faster switches, such as Gigabit (1000Mbps) switches. Dante also recommends using switches with QoS (Quality of Service).PLEASE NOTE: Computer Monitor not included in purchase.