The RM-3DT is a rack-mount type powered monitor equipped with a Dante function, and provides Dante network signals and analog audio signals monitoring.Main Features:Accepts Balanced Analog Input and Dante Input.Power saving design by the digital amplifier and switching power supply.26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.The display brightness can be adjusted in four levels.Outputs either or both of any 2-channel digital signals extracted from Dante network signals.Supported sampling frequencies: 44.1/48/88.2/96 kHz.Physical dimensions are identical to the conventional RM-3 for easy replacement.DMM (Dante Domain Manager) readyAES67 compatibleSpecifications:SPEAKER SECTION:Unit: 110 x 40mm rectangle cone typeImpedance: 8 ohmSound Pressure Level: 84dB / W (1m)Frequency response: 200 Hz 20k HzAMPLIFIER SECTION:Rated output: 10W x 2Residual Noise: -50dBV or less (DIN AUDIO)Distortion (T.H.D.): less than 0.1%INPUTS:Connector: Dante Input (RJ45), XLR-3-31 (balanced)Analog Input Level: +4/0 dBu (balanced)Analog Input Impedance: 10k ohm or moreTHROUGH OUT:Connector: XLR-3-32 (balanced)PHONES:Connector: 1/4 Stereo PhoneInput Impedance: 16 ohm or higherMaximum Output Level: 20mW + 20mW (32 ohm, 1kHz)LEVEL METER:Display: 26 dot LED x 2Reference Level: XLR: +4/0 dBu (analog)GENERAL:Dimensions: 482 (W) x 44 (H) x 284 (D) mm (incl. protruded parts)Weight: approx. 3.5kgPower Requirement: AC 100 240V (50/60Hz)Power Consumption: 10W*Dante is a registered trademark of Audinate