• Cost-effective;
• Built-in MCU to calculate sensor data;
• IIC, serial communication format;
• Unified data output
• Working voltage: 3 ~ 5 V

Description:

• Name: 4 in 1 weather station module(light intensity + temperature and humidity + atmospheric pressure module)
• Model: GY-39
• Using chip: MAX44009+BME280+MCU
• Power supply: 3-5v
• Module size: 24.3*26.7mm
• Communication mode:MCU_IIC/MCU_Serial / sensor chip IIC bus

Introduction:

GY-39 is a low cost, air pressure, temperature and humidity, light intensity sensor module. The working voltage is 3-5V. The power consumption is small, and the installation is convenient. The working principle is that the MCU collects various sensor data, performs unified processing, and directly outputs the calculated result. This module has two ways to read data, namely serial UART (TTL level) or IIC (2 line). The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and two output modes are requested, and the settings can be saved after power down. It can adapt to different working environments, and connect with single-chip computer and computer. The module can also set a separate sensor chip operating mode. As a separate sensor module, the MCU does not participate in data processing. Provide arduino, 51, stm32 MCU communication program, does not provide schematic and internal MCU source code. This GY39 module also gives Android mobile phone software app to view data, and supports wifi LAN connection, mobile phone and computer display data at the same time.

Features:

1. High cost performance
2. Built-in MCU to calculate sensor data
3. IIC, serial communication format
4. Unified data output
5. With the corresponding PC software

Application:

1. Digital lighting management
2. Internet of Things, smart home applications
3. Weather station monitoring
4. Digital lighting design
5. Digital barometer, altimeter
6. Thermometer
7. Greenhouse climate monitoring

(1) PinA (S0) hardware selects the working mode, Pin2 (CT) and Pin3 (DR) is the GY-39 module communication interface

(2) PinB (S1) uses only the sensor chip ME280+MAX44009 mode to select whether the MCU participates in data processing

Package Included:

1 x GY-39 humidity atmospheric pressure sensor module