The DSQD Half Rack Receiver with analog and digital Dante network audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless systems with continuously tunable tracking filters covering 470.100 – 614.375 MHz.The DSQD Receiver is a four-channel design with a host mainframe that contains the DSP, microprocessor, antenna multicoupler and control interface.Antenna ports on the rear panel accept input from remote antennas, with a loop-thru output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel.Main Features:Four-channel, half-rack designContinuously tunable tracking filters covering 470.100 – 614.375 MHzCompatible with DSW, Duet and Digital Hybrid Wireless transmitters Built-in wideband antenna multicoupler with loop-thru for additional receiversAntenna bias power enabled from the front panel (fused and over-temperature protected)IR bi-directional port for transmitter setupAnalog and Dante audio outputs with TalkBack (in applicable RX modes)Ethernet and USB interfaceOffline full-system frequency coordinationWhy Dante?Plug-and-play technology automatic discovery and simple signal routingReduced Cost & Complexity No special skills required to set up audio networkingSample accurate playback synchronizationLowest latency available from any networking technologyAdd/remove/rearrange components at willDeterministic latency throughout the networkSupport mixed bit depths and mixed sample rates over one networkScalable, flexible network topology supporting a large number of senders and receiversSupports 1Gbps networks Supports a single integrated network for audio, video, control, monitoringUses inexpensive, off-the-shelf computer networking equipmentSpecifications:Operating Spectrum: 470.100 – 614.375 MHzFrequency Adjustment Range: 25 kHz stepsSampling Size and Rate: 24-bit, 48 kHzDigital Modulation: 8PSK with Forward Error CorrectionData Encoding: Proprietary ADPCMEncryption: AES 256-CTR (per FIPS 197 and FIPS 140-2)Latency: Digital Source: 1.0 ms plus Dante networkAnalog Source: <1.4 msAudio Performance:Frequency Response: 20 Hz - 20 KHz, +\-1 dBTHD+N: 0.05% (1 KHz @ -10 dBFS)Dynamic Range: 108 dB A-wtd, NR=NORMALAdjacent Channel Isolation: >85 dBDiversity Technique: Noiseless antenna switchingSensitivity: -98 dBm for 10-5 BERAntenna Inputs/Outputs: Dual BNC female, 50 ohm impedanceAudio Outputs:XLR: Balanced, -35 to +8 dBuHeadphone: 1/4 inch phone jackDante: RJ45External DC Power: 7 to 18 VDC; 2.5A (max)Weight: 1.95 lbs.; 880 gramsDimensions: 8.375 x 1.75 x 7.375 in. 213 x 44.5 x 187 mm