The DSR digital receiver provides the highest level of RF and audio performance available with a versatile feature set in a compact design for camera mounted applications. Settings can be made from the front panel, making the unit ideal for use in camera hop configurations, in bags and on sound carts. An RF spectrum analyzer and SmartTune are built into the receivers to alleviate interference problems in an increasingly congested RF spectrum.The mechanical design of the receivers fits into the SuperSlot ecosystem and combines field-proven features developed over many years of experience in motion picture and television production. To decrease weight, the DSR provide a two channel receiver in one unit powered by external DC. The receivers are also equipped with an IR port for data transfer between units. The machined aluminum housing and panels are surfaced with a hard-anodized finish with laser etched markings to withstand the rigors of field production.Main Features:Two independent channels, compact designVector diversity for superior performanceLatest generation of SR Series: Compatible with huge existing ecosystemCompatible with D2, HDM, Duet and DCHX Digital modes and all hybrid modes24 bit/48 kHz digital for flawless audioAES 256-bit, CTR mode encryption, with 4 different key policies availableAnalog and AES3 digital audio outputsExternal DC powering options and USB input for firmware updates and data transferSpecifications:Frequency Selection Steps: 25 kHzFrequency Stability: 0.001 %Front end bandwidth: 5.5 MHz, @ -3 dBSensitivity:20 dB Sinad: 0.9 uV(-108 dBm), A weighted60 dB Quieting: 1.12 uV (-105 dBm), A weightedAM rejection: >60 dB, 2 uV to 1 VoltModulation acceptance: 85 kHzSpurious rejection: 85 dBThird order intercept: +11 dBmDiversity method: Vector diversityAntenna inputs: 50 Ohm; SMA female connectorsAudio output connectors:Interchangeable D connector adapters or camera slot interfacesDual TA3 male (mini XLR) balanced output adapterBattery sled adapters with TA3 male outputs.Front panel output (5P model): Control panel TA5M with two balanced outputsAudio Performance (overall system):Frequency Response: 25 Hz to 20 kHz (+0/-3 dB)THD: 0.2% (typical)Input Dynamic Range: 125 dB (with full Tx limiting)Overall Latency (time delay): 1.4 ms with digital source, <2.9 ms with Hybrid TXAudio Test Tone: 1 KHz, -50 to +7 dBu, <1%THDControls:Front Panel:Color LCD displayMenu/Sel, Pwr/Back, Up/Down Arrow ButtonsUSB PortIR Port Rear Panel:Proprietary connector for audio/power accessory panels.External Power: Minimum 9 Volts to maximum 17 VDC 2.7 W; 225 mA at 12 VDCWeight:DSR 164 grams (5.8 oz.) w/o audio adapterDSR5P 195 grams (6.9 oz.)Dimensions: 3.23 wide x 1.23 high x 5.50 deep, 82 wide x 31 high x 140 deep mm