Neumanns Automatic Monitor Alignment is a dedicated tool for stereo sets of KH 80 DSP monitors with or without the KH 750 DSP as well as two non-DSP-based KH Line monitors connected to the analog outputs of a KH 750 DSP subwoofer. Unlike conventional correction software, it is an integrated solution with novel algorithms, developed specifically for Neumann studio monitors. No plug-in or special audio driver is required; alignment data is stored and processed within the DSP-powered monitors themselves. As a unique benefit, the software not only optimizes the amplitude response but also the phase. This provides highest accuracy in terms of tonality and impulse reproduction.Main Features:For stereo setups with KH 80 DSP and all pairs of analog (non DSP-based) Neumann monitors using the KH 750 DSP subwooferCan upgrade the performance of all analog KH series when connected to a KH 750 DSP, including phase and amplitude optimizationMeasurement microphone is included. The individual calibration with the MA 1 software makes it a Class 1 microphone!The Automatic Monitor Alignment is like having your own personal Neumann engineers with decades of experienceFor Mac and PCSpecifications:Acoustic operating principle: Pressure transducerDirectional pattern: OmnidirectionalFrequency range: 20 Hz – 20 kHzSensitivity at 1 kHz into 1 k: 30 mV/Pa -30 dBV 3 dB uncalibrated | 30 mV/Pa -30 dBV 0,5 dB Calibrated (via software)Rated impedance: 50 OhmRated load impedance: 1000 OhmSignal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 55 dBSignal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 67 dBEquivalent noise level, CCIR1): 39 dBEquivalent noise level, A-weighted1): 27 dB-AMaximum SPL for THD 0.5%2): 132 dBMaximum output voltage: 10 dBuSupply voltage (P48, IEC 61938): 48 V 4 VCurrent consumption (P48, IEC 61938): 3 mAMatching connector: XLR3F Weight: 37 gDimensions (diameter / length): 23 mm / 117 mmOperating temperature range: 0 C – +70 C (32 F – 158 F)Storage temperature range: 20 C – +70 C (4 F – 158 F)Humidity range: max. 90 % at +20 C*Microphone stand and microphone cable not included with purchase.