The Nicom Phase Locked Loop Programmable FM Exciter/Transmitter.*Transmitter comes from the factory in a mono configuration. Ask your BSW rep for more information on the stereo configuration.Main Features:Includes low pass/harmonic filter and can be used as a stand-alone transmitterInstant front panel programmability in 10 kHz incrementsAll functions via LCD password protectedAdjustable power output from 0 to 30 W with automatic power controlRemote control features (optional) include: power on/off, fwd & ref power metering, ability to change frequency and Internal temperature metering24 Volts power capabilityFCC and Industry Canada CertifiedTelemetry Output and FSK-ID Keyer (optional)Specifications:Rated Output Power: 0-30 Watts continuously variable (ALC)RF Output Connector: “N” type femaleRF Output Impedance: 50 ohmFrequency Range: 87.5 MHz to 108 MHzFrequency Programmability: direct from front panel in 10 kHz incrementsFrequency Stability: better than 5 ppm ( 500 Hz)Modulation Type: direct carrier frequency modulationEmission class: F3ESpurious & Harmonic Suppression: < - 80 dB or betterStereo Separation: 55 dB @ 1 KhzDistortion: < 0.1 % (typ. 0.05 %)Asynchronous AM S/N Ratio: 65 dB below reference carrier with 100%amplitude modulation at 400Hz without de-emphasis, no FM modulation presentSynchronous AM S/N Ratio: 60 dB or better below reference carrier with 100% amplitude modulation at 400 Hz, without de-emphasis, FM modulation = 75 kHz at 400 HzAC Power Requirement: 117 or 230 V, 10%, 50-60 Hz, single phase (Internally Selectable)Power Consumption: approx. 150 W from ACDC Power Requirement: 24 VDC, 3APanel Size: 483 mm (19") W x 44 mm (1.8") H (1 standard rack spaces high)Overall Depth: 410 mm (16")Weight: 5 Kg (11 Lbs)Ambient Temperature Range: 0 to 50 C (32 to 122 F)Pre-emphasis: for FCC 75 sec; for CCIR 50 sec internally selectableComposite Operation:Composite Inputs: four total, 1 for MPX and 3 for SCAMPX Input: 1 unbalanced BNC connectorMPX Input Impedance: 2k ohmMPX Input Level: 3.5 Vp-p (1.237 Vrms/3.64 dBm)Composite FM unweighed S/N ratio: >68 dB below 75 kHz deviation at 400 Hz measured in a 30 Hz to 100 kHz bandwidth with 75 sec de-emphasis (RMS)Composite Total Harmonic Distortion: 0.05% typicalComposite Intermodulation Distortion: 0.05%, measured with a 1 kHz and a 1.3 kHz tone, 1:1 ratio, at 100% modulationBaseband: 30 Hz 60 Khz within 0.15 dBCrosstalk: Main to stereo subchannel and stereo subchannel to main >55 dB (60 dB typical)SCA Inputs: 3 unbalanced BNC connectorsSCA Input Impedance: 10k ohmSCA Input Levels: 0 dBm (775 mVrms/2.2 Vp-p) nominal for 7.5 kHz deviation, adjustableSCA Amplitude Response: 0.8 dB, 40 kHz to 100 kHzCrosstalk: 67 kHz SCA to main or to stereo subchannel >65 dBCrosstalk: 92 kHz SCA to main or to stereo subchannel >70 dBMonaural Operation:Audio Input Impedance: 600 ohm balanced or unbalanced; 50 dB common mode suppressionAudio Input Level: 0 dBm (775 mVrms/2.2 Vp-p) for 75 kHz, adjustableFM S/N Ratio: >70 dB below 75 kHz, deviation at 400 Hz measured in a 30 Hz to 20 kHz bandwidth with 75 sec de-emphasis (RMS)Audio Frequency Response: 0.8 dB, 30 Hz to 15 kHzlntermodulation Distortion: 0.05% or less, measured with a 1 kHz and a 1.3 kHz tone, 1:1 ratio, at 100% modulation*Please consult a licensed broadcast engineer to determine if this unit is right for your application and you are meeting all of the appropriate legal requirements. You can review the FCC regulations on LPFM and unlicensed usage below.