The ON-AIR 85 from NotaBotYet is designed for easy installation of on air lights powered by 12 volts such as offerings from common brands like American Recorders, Titus, Sandies, CBT, and other On-Air lights requiring 12 volts at 1 amp or less. The unit provides an interface to Axia GPIO, Wheatnet Logic, or any other open collector logic or dry relay closures to ground. In addition to standard ON and OFF, a variety of flashing and pulsing programs are available based on the 4 input control lines (See Table 1). When coupled with Axia GPIO, or Wheatnet Logic, the end user could use those systems to program different flash patterns for different on-air scenarios. For instance, a steady ON could just mean mics are live but a triple strobe flash could mean the studio is live on a network. Fifteen pre-programmed on and flashing patterns are available to the installer.NOTE: THIS DEVICE IS NOT INTENDED TO DIRECTLY CONTROL 110V ON AIR LIGHTS.Main Features:Output patterns include Steady On and 14 other flashing patterns outlined in the Light Mode table.+12V and GND on Barrier StripCompact DesignSurface Mounting With Included ScrewsMount Under Counter or on Wall2.1mm Power Connector