Add a hardware volume control dial to Picade Max USB Audio!

Picade Max Encoder is a small board with a digital rotary encoder conveniently pre-attached. Connect it up to the ‘Encoder’ port onPicade Max USB Audioand adjust the volume of your homebrew arcade machine (or alternate cool DIY build), with no soldering required The encoder is also a button, so you can click it to mute/unmute.

It comes with the same snazzy black aluminium dial that we use in ourPicade Maxkit, and a 200mm Qwiic/JST-SH cable for plugging it in. If you need a longer cable, they’reavailable here.

Picade Max USB Audio board is not included.

Kit includes

• Picade Max Encoder board, with EC11 digital rotary encoder
• Black aluminium dial
• JST-SH to JST-SH cable (200mm)

Notes

• This is not an I2C device! We’ve used a 4-pin JST-SH (Qwiic) connector for convenience but it’s not compatible with the Qw/ST / Qwiic / STEMMA QT I2C ecosystem.
• Dimensions:
  • Board measures 18 x 38 mm (L x W)
  • Total assembled height: 22mm (approx)
• The mounting holes areM2.5, inset 3mm from each edge (AKA 32×12 hole pattern).