The CrewCom Radio Transceiver houses a radio with corresponding antennas and serves as an access point enabling RF communications with CrewCom Radio Packs. Using CrewNet as a backbone, up to 46 RTs can be positioned on the network throughout a wide coverage area by being linked back to a Control Unit either directly, through a Hub(s), or connected in a daisy-chain configuration.What’s Included: Radio Transceiver Omni-Directional Antenna (x2) 15ft. (4.6 m) Cat 5e cable USB A to Micro B cable Mounting Hardware and Bracket Product Overview Guide Warranty Extension Registration CardSpecifications RF Frequency (MHz): 24002483 MHz RF Scheme: FHSS with TDMA Effective Radiated Power: 100 mW (+20dBm) Receiver Sensitivity: -100dBm at 10-5 BER Radio Certification: FCCID: HSW-CCT24 and IC: 4492A-CCT24 Transmission Range: 150 m (500 ft.) under typical conditions; 450 m (1500 ft.) line of sight. Note: Functional range depends on many variables, including RF signal absorption, reflection, and external interference. Number of Radio Packs Supported (when RT in Normal mode): 6 Number of Antenna Connections per RT: 2 Antenna Connector Type: RP-TNC Supplied Antenna: +2dBi Omni-directional (whip) CrewNet In Port (supports 1 connection): (1) RJ-45 for copper; (1) duplex LC for Single Mode Fiber RT Loop Port: (1) RJ-45 Maximum CrewNet Line Length: Copper 100 m (330 ft.); Fiber 10,000 m (32,800 ft.) Network Power (Power over CrewNet): CrewNet RJ-45 only External Power: 48VDC Power Supply (Sold Separately) Dimensions without Antennas (L x W x H): 16 cm 19.7 cm 4.6 cm (6.30 in. 7.74 in. 1.81 in.) Weight: 567 g (1.25 lbs) Operating Environment: -20 to 50 C (-4 to 122 F); 10% to 90% Humidity Maximum Altitude: 2,000 m (6,562 ft.) RoHS: Yes Compliance Model Number: RT2505