This simple board breaks out all five pins of a USB Micro-B connector to a 0.1 pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1 connectors.

This board breaks out the VBUS, GND, D-, D+, and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 15 row of 0.1-spaced pins on the board.

The included 15straight male headercan be soldered to these pins to allow the board to be used with standard perfboards,solderless breadboards, and 0.1 connectors.

This tiny unit measures only 0.350.6 (0.40.6 including its USB Micro-B connector) and has two 0.086 diameter semi-circular cutouts for mounting with #2 or M2screws.

Resources

• Dimension Diagram
• 3D Model
• Drill Guide