The D SERIES-BTN44 modules are wall-mounted user Dante audio interfaces that include bidirectional Bluetooth audio, unbalanced analog stereo or mono audio inputs and outputs, and a balanced or unbalanced line-level output. Stereo audio from a compatible Bluetooth-enabled device feeds two Dante network audio channels. Stereo audio connected to a front-panel Mini-Jack or L and R RCA jacks feeds two other Dante network audio channels.Stereo audio is available to users through a front-panel Mini-Jack fed from two Dante network channels. A rear-panel terminal block provides either a balanced (+4 dBu) or unbalanced (-10 dBV) output from one Dante network channel. That output may feed a variety of RDL wall panels to provide a specific mic or line level output to users, or it may be used to feed the audio power amplifier in the associated audio zone. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication.The D SERIES-BTN44 modules are powered from PoE. The installer can customize the module name and programming password through RDL Console 2.0 software. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.Main Features:Bluetooth Audio Input for Dante Networked SystemConsumer Audio Inputs on Mini-Jack or RCA JacksReturn Audio Talk Channel from Dante Network to Bluetooth Connected DeviceQ-SYS Plug-In Available for Configuring in Q-SYS EnvironmentConsumer Audio Outputs on Mini-JackBalanced and Unbalanced Audio Line Outputs on Rear PanelIntuitive Single Button Bluetooth Pairing with LED Status IndicationBluetooth Settings Configurable via RDL Console 2.0 SoftwareCustomize the Module ID Name and Settings via RDL Console 2.0 SoftwareMono or Stereo Mode for Audio Inputs is Switch-Selectable Behind Cover PlateModule is PoE PoweredSpecifications:Typical PerformanceNetwork Connector: RJ45 with Link and Speed indicatorsDigital Audio Ethernet Protocol: DanteTransmission Rate: 100 MbpsSample Rates Supported: 44.1 kHz, 48 kHz (default)Bit Depth Supported: 24 bitsAudio Operating Levels: -20 dBFS = +4 dBu (balanced); -20 dBFS = -10 dBV (unbalanced), nominalBluetooth to Network Interface SectionFrequency Response: 20 Hz to 20 kHz ( 0.5 dB)THD+N: < 0.1%Noise below -20 dBFS: < -70 dBNetwork to Bluetooth Interface SectionVoice signal feeding device: One Dante channel (mono, -20 dBFS nominal)Network to Mini Jack Output SectionOutput: Stereo mini-jackFrequency Response: 20 Hz to 20 kHz ( 0.75)THD+N: < 0.05%Noise below -20 dBFS: < -80 dBCrosstalk (channel to channel): < 80 dB (1 kHz); < 65 dB (20 kHz)Network to Line Output SectionOutputs: Balanced and unbalanced on detachable terminal blockFrequency Response: 20 Hz to 20 kHz ( 0.5 dB)THD + N: < 0.05%Noise below -20 dBFS: < -80 dBLine Inputs to Network Interface SectionInputs (4) Stereo mini-jack (L and R); RCA jack (L and R)Dante channels used (2): L and RFrequency Response: 20 Hz to 20 kHz ( 0.25)THD + N: < 0.05%Noise below -20 dBFS: < -75 dBCrosstalk (channel to channel): < 75 dBCommonIndicators (5): Bluetooth (2), Network SyncPower Connection: PoE (RJ45)Ambient Operating Environment: 0 C to 40 CPower Requirement: PoEPoE: Class 0, IEEE 802.3afDimensions: 3.52 (8.94 cm) W; 4.11 (10.44 cm) H; 2.09 (5.31 cm) DPackage Type: Cardboard BoxPackage Dimensions: 6.0 x 6.0 x 2.625 in.Shipping Weight: 1.15 lb.WEEE Weight: 0.78 lbs.Tariff Code: 8518.50.0000