Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio. The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow.What’s Included: AD4Q Power cable BNC bulkhead adapter Coaxial antenna BNC cable assemblies BNC cable Ethernet cables User guideMain Features:Wide tuning range up to 184 MHzTrue digital diversity reception per channel for drop-out resistanceNetworked control with Wireless Workbench software and ShurePlus Channels iOS appQuadversity mode for extended antenna coverage and improved RF signal-to-noiseFront panel headphone jack enables Dante Cue and Dante Browse monitoringConfigurable Ethernet switch for redundant Dante digital outputSwitchable XLR and AES3 outputsChannel Quality meter displays RF signal-to-noiseLocking AC connectorsOptional DC module available to support redundant powerSpecifications:RF Carrier Frequency Range: 470960MHz, varies by regionWorking Range: 100m (330ft) Note: Actual range depends on RF signal absorption, reflection and interference.RF Tuning Step Size: 25kHz, varies by regionImage Rejection: >70dB, typicalRF Sensitivity: 98dBm at 10-5 BERLatencyAnalogOutput:STD: 2.08msHD: 2.96msAudio Frequency Response:AD1: 20 20kHz (1dB)AD2: Note: Dependent on microphone typeSignal-to-Noise Ratio(Dynamic Range)(typical, 20 Hz to 20 kHz, receiver gain setting = -12 dB)XLR Line Output: 120dB A-Weighted, 117dB UnweightedDigital (AES3/Dante): 130dB A-Weighted, 126dB UnweightedTotal Harmonic Distortion: -6 dBFS, 1 kHz, System Gain @ +10 <0.01%System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.Operating Temperature Range: -18C (0F) to 50C (122F) Note: Battery characteristics may limit this range.Storage Temperature Range: -29C (-20F) to 65C (149F)Audio Output:Gain Adjustment Range: 18 to +42dB in 1 dB steps (plus Mute setting)Configuration:XLR: Transformer Coupled Balanced (1=ground, 2=audio +, 3=audio )TRS: Transformer Coupled Balanced (Tip = Audio +, Ring = Audio -, Sleeve = Ground)Impedance: 100,Typical,XLR Line OutFull Scale Output (200Kload):LINE setting: +18 dBVMIC setting: 12 dBVTRS: +8 dBVMic/Line Switch: 30 dB padPhantom Power Protection: YesDimensions: 44 x 483 x 333mmH x W x DWeight: 4.8kg (10.6lbs), without antennasHousing: Steel; Extruded aluminumPower Requirements: 100 to 240 V AC, 50-60Hz, 0.68 A max.Thermal Power DissipationMaximum: 31W(106BTU/hr)Idle: 21W(72BTU/hr)DC Power Requirements: 10.5 to 32V DC4.0 A max.Network Interface: 10/100 Mbps, 1Gbps, Dante Digital AudioNetwork Addressing Capability: DHCP or Manual IP addressMaximum Cable Length: 100m (328ft)Cascade Output:Connector Type: BNC (Note: For connection of one additional receiver in the same band)Configuration: Unbalanced, passiveImpedance: 50Insertion Loss: 0dB, typicalRF Input:Spurious Rejection: >80dB, typicalConnector Type: BNCImpedance: 50Bias Voltage: 12 to 13.5VDC, 150mA maximum, per antenna switchable on-offRF Carrier Frequency Rangemodel dependent:AD4Q=A: 470636MHzAD4Q=B: 606810MHzAD4Q=C: 750960MHz