The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.Main Features:Dante focused interface for connection of external audio into or out of a Dante audio network 32 channel analog line input and 32 analog line outputs (48kHz/96kHz) using 8 D-Sub connectors Dual redundant Ethernet jacks which support both primary and secondary connections Up to 24 bit/96kHz quality LED display for signal level and overload per input/output channel Reference level dip switches for selectable DBu level metering Firmware updatable via Dante port AES67 and Revenna compatibleSpecificationsFormats:44.1/48 kHz, 16/24 bit88.2/96 kHz, 16/24 bitInput/output ratings:PRIMARY/SECONDARY connectors:Connector: RJ-45Transmission protocol: DanteGigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)Cables: category 5e or faster STP cablesANALOG OUTPUT connectors:Connector: D-sub 25-pinLocking screws: No. 4-40 UNC (inch type)Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)Output impedance: 200 or lowerApplicable load impedance: 2 k or higherANALOG INPUT connectors:Connector: D-sub 25-pinLocking screws: No. 4-40 UNC (inch type)Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)Input impedance: 10 k or higher* 0 dBu=0.775 VrmsAudio performance:ANALOG IN to DANTE OUT:Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-0.5 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)S/N ratio: 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)DANTE IN to ANALOG OUT:Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)S/N ratio: 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)Other:Power: AC100-240 V, 50/60 HzPower consumption: 22WDimensions: 483 45 303.8 mm (width x height x depth)Weight: 3.5 kgOperating temperature range: 040Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owners Manual (this document) including warranty x1