[email protected] Free Shipping On Orders Over $40

Shopping Cart

This next generation high-res multi-track handheld recorder comes with two 14.6mm diameter built-in microphones, the largest in our lineup. Employing a detachable mechanism, both L and R microphones can be flexibly attached/detached from the main unit to form A-B / True X-Y mic patterns. The Portacapture X8 provides a preset level setting to achieve a wide dynamic range utilizing the premium dual AD converters and 32-bit float point recording technology. The result is content with uncompromised audio quality even with low level recordings. The audio data can be edited and increased later without deteriorating the S/N (signal-to-noise ratio). Also the internal normalize function allows automatic level alignment of the 2-mix file after recording. Combining these features, theres no need to use valuable creative time finding the right audio level that matches the recording.The new Launcher system and 3.5-inch color touch panel allow smooth navigation to select the best audio settings that match the application. Taking advantage of these presets, users will have more time to focus on the actual recording without the need to struggle with complicated settings.Main Features:Intuitive Launcher system using a 3.5-inch color touch panel displayRecording applications such as basic multi-track recording, podcasting, music, voice (interviews, vlog), field recording, ASMR and more4 XLR/TRS locking combo jack MIC/LINE inputs with individual phantom power supply (24V/48V) and in-house-developed HDDA (High Definition Discrete Architecture) mic preampsSupports up to 192kHz/ 32-bit float point recordingDetachable 14.6mm large-diaphragm condenser mics for both A-B position and X-Y positionIncludes 8-in/2-out USB audio interface functionInternal mics can be used as a USB audio sourceInternal recording to SD card is available while the unit is functioning in USB audio interface modeInternal multi-track recording up to 8 tracks (6 tracks + 2 mix)TASCAM Portacapture Control app for wireless remote control via mobile devices (with optional AK-BT1 Bluetooth adapter)Dual recording mode enables each track to be recorded in a different file formatEquipped with a variety of functions such as low-cut filter, compressor, limiter, auto-gain control, reverb, noise gate and normalizeCAMERA/EXT input allows audio recorded on a camera to be monitored and also supports audio input of wireless microphones and moreCAMERA/LINE output with attenuation function allows for sending audio to external devices like cameras, etc.Audio monitoring is possible with either headphone output or the built-in speakerSupports micro SD/micro SDHC/micro SDXC (up to 512GB) recording mediaEquipped with a Mark function and slate tone functionPowered by 4 AA batteries, USB bus power, or optional AC adapter (PS-P520U)Supports multi-language menu display (English, Japanese, French, Spanish, German, Italian, Chinese, Korean, Russian)Specifications:Recorder specifications:Recording media:microSD cards (64MB 2GB)microSDHC cards (4GB – 32GB)microSDXC cards (48 GB 512 GB)Recording/playback formats:WAV (BWF): 44.1k/48k/96k/192kHz 16/24-bit, 32-bit floatMP3: 44.1k/48kHz,128k/192k/256k/320kbpsNumber of channels:Input channels: 6 channels maximumRecording tracks: 8 tracks maximum (6 tracks, stereo mix)Analog audio input ratings:Mic inputs (unbalanced). Input jacks 12 (support plug-in power)Connectors: 3.5mm (1/8) TRS mini jacksInput impedance: 85k or higherMaximum input level: +1 dBVMinimum input level: -69.3 dBVMic inputs (balanced):Input jacks 36 (input set to MIC):Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD) 6.3mm (1/4) standard TRS jacks Input (Tip: HOT, Ring: COLD, Sleeve: GND) Note: phantom power supported by XLR onlyInput impedance: 2.2k or higherMaximum input level: +2 dBuMinimum input level: -75dBuInput jacks 36 (Input set to LINE):Connectors: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD) 6.3mm (1/4) standard TRS jacks Input (Tip: HOT, Ring: COLD, Sleeve: GND)Impedance: 9k or higherNominal input level:+4 dBu (GAIN:min)Maximum input level:+24 dBuMinimum input level: -53dBuLine input (unbalanced): EXT IN jackConnector: 1/8″ (3.5mm) Stereo Mini jackInputimpedance: 8.5k or higherNominal input level: -10dBV (GAIN:min)Maximum input level: +10 dBVMinimum input level: -48 dBVAnalog audio output:Line output (unbalanced): LINE OUT jackConnector: 1/8″ (3.5mm) Stereo Mini jackOutput impedance: 200Nominal output level: -14dBVMaximum output level: +6 dBV(Note: 0dBV=1Vrms, 0dBu=0.775Vrms)Headphone output: headphone jack:Connector: 1/8″ (3.5mm) Stereo Mini jackMaximum output: 45 mW + 45 mW (THD+N 0.1% or less, into 32 load)Built-in speaker: 0.4 W (mono)Control input/output ratings:USB port:Connector: USB Type-CFormat:USB 2.0 HIGH SPEED mass storage classBluetooth device connector: For Bluetooth adapter (AK-BT1) onlyAudio performance:Frequency response (Input jacks 16and EXT IN jack)20Hz 20kHz at 48kHz: +0/-0.3dB (JEITA)20 Hz 60 kHz at 192 kHz: +0/-2.5 dB (JEITA)S/N ratio:Input jacks 12 (20kHz SPCL LPF, A-weighting):101dB (48kHz)104dB (192kHz)Input jacks 36, EXT IN jack (20kHz SPCL LPF, A-weighting):102dB (48kHz)105dB (192 kHz)Total harmonic distortion ratio (THD+N) (1kHz sine, -5 dBFS input, GAIN: min,20kHz SPCL LPF):Input jacks 12: 0.005%Input jacks 36 (LINE IN): 0.008%Input jacks 36 (MIC IN): 0.006%(Note: JEITA indicates conformance to JEITA CP-2150)Computer system requirements:(Note: Operation with each OS was confirmed with standard system setups that met the following conditions. Operation is not guaranteed, however, with all systems that meet the following conditions.)Windows (Supported operating systems):Windows 11 64-bitWindows 10 64-bitComputer hardware requirements: Windows computer with a USB 2.0 (or higher)(Note: Operation is not guaranteed using the TASCAM driver with ARM64 CPUs.)Mac (Supported operating systems):macOS Big Sur (11)macOS Catalina (10.15)Computer hardware requirements: Mac with a USB 2.0 (or higher) portiOS device:iOS 14 / iPadOS 14, iOS 13 / iPadOS 13(Note: iOS 15 / iPadOS 15 are currently being tested.)Android device:Android 10, Android 11(Note: Compatibility has been confirmed, but this does not guarantee operation with all devices.)Other:Power:4 AA batteries (Alkaline, Ni-MH or Lithium-ion)USB bus power from a computerTASCAM PS-P520U AC adapter (sold separately)Power consumption: 7.5 W (maximum)Dimensions: 83 x 205.6 x 41.5mm (W H D, including protrusions)Weight: 472g/381g (with/without batteries)Operating temperature range: 040C

Add a Review

Your email address will not be published. Required fields are marked *

Related Products