[email protected] Free Shipping On Orders Over $40

Shopping Cart

  • Driver: ST7735S
  • Interface: SPI
  • Display color: RGB, 65K color
  • Resolution: 128×160
  • Backlight: LED
  • Operating voltage: 3.3V/5V

Description :

This is a general LCD display Module, 1.8inch diagonal, 128×160 pixels, with embedded controller, communicating via SPI interface.

Features

  • SPI interface, requires minimum GPIO for controlling
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Driver: ST7735S
  • Interface: SPI
  • Display color: RGB, 65K color
  • Resolution: 128×160
  • Backlight: LED
  • Operating voltage: 3.3V/5V

Interface

SYMBOL DESCRIPTION
VCC Power (3.3V/5V input)
GND Ground
DIN SPI data input
CLK SPI clock input
CS Chip selection, low active
DC Data/Command selection (high for data, low for command)
RST Reset, low active
BL Backlight

Package Included :

  • 1.8inch LCD Module x1
  • PH2.0 20cm 8Pin x1
Add a Review

Your email address will not be published. Required fields are marked *

Related Products