RUio16FLX-D I/O Rack NewThe Dante-compatible RUio16FLX-D provides 16 channels of either analog input, analog output, or AES/EBU output so you can easily configure systems for use with Yamaha digital mixers and processors. Source channels can be selected in groups of two, and flexible support is provided for I/O expansion.I/O: 16 channels of flexible I/O with Euroblock connectors (analog input, analog output, or AES/EBU output)Dante: 16 receive channels, 16 transmit channelsLocal display and control of gain and phantom power settingsPower consumption: 45 WDimensions (W x H x D): 480 44 369 mm (18.9 x 1.7 x 14.5)Net weight: 4.0 kg (8.8 lb)Design your system first; expand the I/O laterYamaha’s guiding principle in live sound design has always been to capture the genuine sound of the stage and only then to color it with successive layers of audio processing. Staying true to this principle, the RUio16FLX-D is a flexible, Dante-compatible I/O rack that gives you the freedom to select 16 I/O channels from analog inputs, analog outputs, and AES/EBU outputs, providing an optimal solution for designing systems where the I/O configuration may change or exact requirements have not yet been determined. When you need to just add a few more channels or to route an AES/EBU output to a specific location, this reliable I/O box provides and simple, effective solution. It is a worthy addition to any professional audio system.Main Features:Flexibility to handle any change- Freely select and combine 16 I/O channels from analog in, analog out, and AES/EBU out- Sources can be selected in two-channel groups- Each unit can handle three sources simultaneously- Compact 1U chassis design ideal for applications requiring future I/O expansionPort Config for easy setting- Use the Port Config menu from the built-in display to easily change the units I/O setupCheck and set parameters right away with the onboard display- Built-in mini-LCD screen for direct Dante and I/O parameter configuration- No need to connect to a mixing console or PC- Keys and LEDs provide immediate status indication and error notificationDante-enabled for flexible system design- Audinates Dante protocol provides flexible system setup and configuration- Supports a wide variety of device combinations and installation layouts- Built-in Dante redundancy helps maintain operation in the event of network issuesEffortless control from Yamaha consoles and processors- Remote control of HA gain and I/O parameters from compatible Yamaha consoles- Compatible with ProVisionaire Design for processor-based controlUse anywhere with R-Remote- Compatible with Yamaha R Remote control software- Functions as a compact Dante interface for recording and other applications without a mixing consoleSpecial port for dedicated control within huge setups- Supports a dedicated network address for reliable control in large-scale systems- Allows control network management without affecting the Dante networkA solid foundation for inspirational live sound- Inherits Yamaha’s tradition of transparent, accurate sound capture- Designed to faithfully transport stage audio to the mixing environmentSpecifications:General Specifications- Analog Input: 16 (Flexible I/O)- Analog Output: 16 (Flexible I/O)- AES/EBU Output: 16 (Flexible I/O)Sampling Frequency Rate- External: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz 200 ppm +4.1667%, +0.1%, -0.1%, -4.0% 200 ppmSignal Delay- Less than 1.7 ms @Fs=96 kHz- 2.0 ms @Fs=48 kHz- RUio16FLX-D INPUT to RUio16FLX-D OUTPUT connect with DM5 using Dante. Dante Receive Latency set to 0.25 msTotal Harmonic Distortion- Less than 0.05% +4 dBu@20 Hz – 20 kHz, GAIN : 0 dB into 10k – Less than 0.15% +4 dBu@20 Hz – 20 kHz, GAIN : +64 dB into 10k Frequency Response- +0.5, -1.5 dB 20 Hz – 20 kHz, refer to +4 dBu output @1 kHz, input to output, Fs=48 kHz or 96 kHzDynamic Range- 114 dB typ., DA Converter- 109 dB typ., Input to Output, GAIN: 0 dBHum & Noise Level- Equivalent Input Noise: -128 dBu typ., GAIN: +64 dB- Residual Output Noise: -88 dBu, main stereo channel offCrosstalk- INPUT: -100 dB, adjacent inputs, GAIN: 0 dB, @1 kHz- OUTPUT: -100 dB, input to output, @1 kHzPower- Power Requirements: 100240 V, 50 Hz/60 Hz- Power Consumption: 45 WDimensions- Width: 480 mm (18.9″)- Height: 44 mm (1.7″)- Depth: 369 mm (14.5″)Weight- Net Weight: 4.0 kg (8.8 lb)Accessories- Read This First x 1- AC Power cord x 1- Euro block plug mini 3pin x 16- Cable tie x 16Operating Environment- NC Value: Fan Speed LOW: NC=20 / HIGH: NC=25 (Measurement position: 1 m from the front of the unit)- Operating Temperature Range: 0 to 40C- Storage Temperature Range: -20 to 60CAnalog Input Standards- Input Terminal: INPUT 116- Gain: +64 dB / 0 dB- Actual Source Impedance: 10 k- For Use with Nominal: 50600 Mics, 600 Lines- Sensitivity (+64 dB): -80 dBu (0.078 mV)- Nominal (+64 dB): -60 dBu (0.775 mV)- Max.before clip (+64 dB): -40 dBu (7.75 mV)- Sensitivity (0 dB): -16 dBu (123 mV)- Nominal (0 dB): +4 dBu (1.23 V)- Max.before clip (0 dB): +24 dBu (12.3 V)- Connector: Euroblock (3.5 mm pitch) (Balanced)Analog Output Standards- Input Terminal: OUTPUT 116- Actual Source Impedance: 75 – For Use with Nominal: 10 k Lines- Nominal Output Level: +4 dBu (1.23 V)- Max.before clip: +24 dBu (12.3 V)- Connector: Euroblock (3.5 mm pitch) (Balanced)Digital I/O Standards- Dante PRIMARY/SECONDARY- Format: Dante- Data Length: 24-bit / 32-bit- Level: 1000BASE-T- Audio: 16ch TX / RX- Connector: etherCON Cat5eAES/EBU Output Standards- Format: AES/EBU Professional use- Data Length: 24-bit- Level: RS-422- Audio: 16ch output- Connector: Euroblock (3.5 mm pitch) (Balanced)Control I/O Standards- Terminal: NETWORK- Format: IEEE802.3- Level: 1000BASE-T / 100BASE-TX- Connector: RJ-45